|
#1
|
||||
|
||||
Final assembly.
Some pics. I painted the interior, jambs, and front and rear compartments Porsche Iris blue (L39V) here at home, then dropped the body back onto the pan for the last time. After assembling the front suspension, I hauled it to a friend's shop for the exterior paint. I've been working on wiring for 2 weeks, and finally got it sorted, gauges working, and lights burning. I still have to add a fuse holder for the driving lights, and fuel pump.
Made the muffler mounting today from BMW tranny mounts, and aluminum straps.
__________________
Yetibone '71 1302S 1.8 '73 1303S 2.3 '83 928S 4.7 |
#2
|
||||
|
||||
One more... This shows the aluminum mounting plate for the coil, ballast resistor, and fuel pressure regulator, and a pic from the front.
__________________
Yetibone '71 1302S 1.8 '73 1303S 2.3 '83 928S 4.7 |
#3
|
||||
|
||||
nice work man :agree:
__________________
WinterJam 2010: Vdub, Surf, Skate & Musis Fest WinterJam 2010 'I drive way to fast to worry about cholesterol!' '67 Sunroof Notchback * '68 FI Squareback |
#4
|
||||
|
||||
Thanks. It feels good to finally see how it's going to really look with the color.
Makes me feel stoked about building this car again. I'm waiting for my friend at the body shop to fix a couple of maximum flow indicators that ended up on the drivers side fenders, but other than that, the finish is done. I'm still a ways out from being finished. I think the car needs to be about an inch lower in the rear, and a half inch in front. I also have to open the engine back up and install the right oil pump pickup tube for a GE case.
__________________
Yetibone '71 1302S 1.8 '73 1303S 2.3 '83 928S 4.7 |
#5
|
||||
|
||||
Yeti,
Thanks for the updates. Your car looks great, I am looking forward to seeing it.
__________________
73 Type 1 - 2270 Type IV 64 Type 34 - 1500 Type III |
#6
|
||||
|
||||
how nice is that gonna look! what are these maximum flow indicators? good job
|
#7
|
|||
|
|||
What exh system you got in there? That dual outlet out of the drivers kotflugel is gonna look COOL!
Don |
#8
|
||||
|
||||
Quote:
I also managed to get 4' of 1.5" diameter 33% perforated tubing to make a pair of ANSA style resonators, which I haven't done yet. I have to use the remaining 3' to make a muffler that'll last more than a year for my neighbor's Kubota Diesel.
__________________
Yetibone '71 1302S 1.8 '73 1303S 2.3 '83 928S 4.7 Last edited by yetibone; January 6th 2008 at 21:16. |
#9
|
||||
|
||||
I was playin wif Sue's Nikon.
__________________
Yetibone '71 1302S 1.8 '73 1303S 2.3 '83 928S 4.7 |
#10
|
|||
|
|||
nice ride
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|