#1
|
||||
|
||||
lets TALK hayabusa motor
ok guys lets make some talk what about a hayabusa motor in a bug you can turbo them and get 380hp at 20,000RPM ahhh. common 1300cc not bad. so what do you guys got to say?
you can get a used motor off Ebay for 2500$ that's not bad eh. Chris.
__________________
74 Std. GL 08 Vw rabbit 18 WR250R 07 Chevy 3500 Dually |
#2
|
|||
|
|||
Not sure if it is a bad idea, or a god one!? Two things that come to mind is what are the Torque figures on such a motor, and how to reliably get the drive from the motor to the Bug axles/gearbox.
__________________
Zeroaxe |
#3
|
||||
|
||||
hey well I dont' knwo the Tor on the motors but I would just sit it in the back seat and run a straght axel witha chain just like a bike keep it light too.
CHris.
__________________
74 Std. GL 08 Vw rabbit 18 WR250R 07 Chevy 3500 Dually |
#4
|
||||
|
||||
i have seen this done in a fiat 500. the only problem is that the torque on the motor is to little so you will sacrifice accelration i think you culd go just as fast with that 2k by just keeeping it vw
__________________
YEAH ITS GOT A HEMI |
#5
|
||||
|
||||
Cool cool
Ya you can most likely go way fasters with a vw but I just wanted to see what ppl thought ya so it's all good can you think about anything other?? Chris.
__________________
74 Std. GL 08 Vw rabbit 18 WR250R 07 Chevy 3500 Dually |
#6
|
||||
|
||||
I believe there was an interesting thread over at shoptalk in the conversion forum on this topic.. some of the same issues were brough up..
Just FYI Alex
__________________
Alex Olaverri Sales Associate for Bug@5-Speed (US) Email: Bugat5speed@yahoo.com Tele: 973 204-5463 |
#7
|
||||
|
||||
Chris.....
tubframe.....mid engine Hayabusa with 6sp sequential gear box (reverse might be a problem ;-) )....light weight parts for the bug....15 or 16" lightweight rims.... Sounds like an awesome plan for a track/motorcross/street car. You will spend a lot of money for a go fast Typ1 and even more for a go fast Type 4 enigne. You might want to contact Z- Cars in the UK to get some ideas....as they do a lot of motorcycle engine conversions. I think it is something that should be considered. Alex |
#8
|
||||
|
||||
http://bajoenterprises.com/Catalog/S...et_Catalog.pdf
Suzuki Hayabusa 4-in-line aluminum block & head Water cooled 1298 cc displacement Electronic fuel injection 185 bhp Engine Options: Dry Sump Oil System up to 1615 cc up to 250 bhp turbo charger optional
__________________
74 Std. GL 08 Vw rabbit 18 WR250R 07 Chevy 3500 Dually |
#9
|
||||
|
||||
^^just buy thier tranny, mount engine in backseat area, & run radiator by decklid w/special ducting. Drag racers have gotten over 500hp out of these engines on thier bikes by using turbos.
|
#10
|
||||
|
||||
i raced the z cars mini a few years ago at mini's v beetle's at york race way, left me for dead,
just imagine 500bhp with a squirt of nitrous for good measure , like said above they dont apear to be that torque'y though
__________________
former vw trends june 1999 feature car former volksworld december 1996 feature car |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|