#1
|
||||
|
||||
High perf and stock type 4 engine parts 2270
:-( my entire t4 engine lot is up for sale. hopefully ill be able to do it later on.
help me out. heres what i have -78.4mm DPR stroker crank with type 1 journals(stock rod journals, 10 on mains)-400 -96mm piston and cylinders(already machined by rimco to proper specs) and hasting rings-350 -H-Beam Rods, type 1 5.395"-300 -Webcam 163/86b broke in on dyno only.-75 -HEADS -1.7l heads, recently rebuilt-100 -1.8 heads-75 -2.0 heads oval ports, non porsche-75 -New Johnson lifters -2L crank and rods-100 -1.8L crank and rodsx2-50 each -2 cases in good condition, 1 is polished on top, the other isnt. ? - 1.7 p+c set, barely used, couple broken fins-40 -new 210mm clutch-10 -bus 210mm flywheel-40 -210mm new pressure plate-30 -porsche 914 flywheel-50 -fuel injection system off of 1.8l engine-100 -used 1.8l p+c set-30 -3 94mm cylinders-30 -stock aluminum pushrods-15 -valve covers-10 -windage tray-10 -2 fan shrouds w/ alternators-40 each -CB carb manifolds-35 -rebuilt 42 DCNF carbs-250 -DCNF t1 manifolds-30 -DCNF t4 Shortie manifolds(very short, good if you are putting in a type 3)-50 -Both of Jakes Bug Me videos, How to rebuild your T4(VHS)-20, and DTM install.(DVD)-20 Email me with offers. Shipping not included in price After a week, they are going on ebay If you need something not on the list, ask me, I might have it. pics are http://www.cardomain.com/memberpage/426700/2
__________________
www.subynotch.com |
#2
|
||||
|
||||
2.0 crank and rods
Do you still have the 2.0 crank and rods and has it being cut already or is it a virgin crank.
|
#3
|
|||
|
|||
hey I sent you a PM did you get it? I want to know what you have still? thanks JR
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|