#1
|
||||
|
||||
Question:slotting the maxx to look like 944 struts
Figured I try to contribute and at the same time ask questions..
I took a side by side comparision picture of the my Maxx vs 944 strut housings.. Here is what I found out.. from far side to inner hole one both the lower holes of the 944 and Maxx they are about 2 and 1/4 inches.. These were rough figures (for discussion purposes only).. The upper holes are different.. one is slotted (944) vs non-slotted (Maxx). The distance from far side to inner hole on 944 is 2 and 1/4 inches, while max was about 2 and 1/2.. Thus I would assume (*** u me) that I would need to slot my maxx 1/4 inch to look like the 944.. BTW the picture of the maxx upper is hard to make out, but there is about a 1/4 inch difference.. Is this assumption correct.. if so what should I use as far as tools.. Lastly the 944 has a bump on it for using camber bolts, how do we duplicate this on the Maxx.. I enclosed some preliminary pictures.. Thanks Alex
__________________
78 Vert, In pieces and on hold also a 73 Saloon, currently being built.. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|