#1
|
||||
|
||||
Late 944 Arms and Eagle Performance Uni-ball
Has anyone used an Eagle performance Uni-Ball coil-over conversion kit with the late 944 arms? I was mocking up the arms tonight and noticed there is a significant offset between where the stock spring plate bolts to the stock trailing arm and where the late 944 arm would bolt-up. Can a spacer be used between where the eagle kit bolts up to the trailing arms and the trailing arms? Does anyone know what the offset differnce is between the stock arms and the later 944 arms?
Thanks
__________________
70 Std. Beetle 03 20th Annv. GTI |
#2
|
||||
|
||||
I'm not using the uni-ball set-up, but I do have the late 944 arms and spring plates. What are you calling offset? The stock arm's, and the 944's are the same distance from the pivot point out to where the spring plate bolts up. The 944 arm is wider only after the spring plate mount.
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans 1962 SC 1776cc SP 944NA brakes, 993 wheels VKG |
#3
|
||||
|
||||
hmmm.... the offset i thought i was seeing was between the where the spring plate bolts up to the trailing arm. it looked like there was a sizeable gap between the late arms and the stock arms. The offset looked to be in the left to right direction not in the front to back . ill try to mock it up again and see i can find any mistakes in the previous attempt.
__________________
70 Std. Beetle 03 20th Annv. GTI |
#4
|
||||
|
||||
Do you still have the original arms? If so, set the 944 arm on top of one of the old arms, and line them up, you will see where the arms differ.
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans 1962 SC 1776cc SP 944NA brakes, 993 wheels VKG |
#5
|
||||
|
||||
i thought i read somewhere that there was a different offset and the 944 spring plates had to be used? i guess ill have to look more carefully.
__________________
70 Std. Beetle 03 20th Annv. GTI |
#6
|
||||
|
||||
Well, there is a difference in bolt patterns, but no offset, and the VW plates on IRS models have a double plate. I'm using the 944 plates, but have all the old stuff I took off for reference if needed.
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans 1962 SC 1776cc SP 944NA brakes, 993 wheels VKG |
#7
|
||||
|
||||
well it sounds like the Eagle Performance plates will work fine then. I communicated with terry from eagle yesterday and all he needs is a sketch of the bolt pattern if there is no offset. thanks for your help. Your car looks good :agree: .
BTW: kinda funny how we both have 70 standards with 87 994t rear arms.
__________________
70 Std. Beetle 03 20th Annv. GTI |
#8
|
||||
|
||||
Thanks. Oh, and don't forget to put a type IV in the back of that bug too!!
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans 1962 SC 1776cc SP 944NA brakes, 993 wheels VKG |
#9
|
||||
|
||||
Levi,
Out of curiosity will your talking with Eagle (Terry) result in a 944 based application? This would definitely fill a void in low cost coilover conversions.. Let us know and continue to keep us posted VR ALex
__________________
Alex Olaverri Sales Associate for Bug@5-Speed (US) Email: Bugat5speed@yahoo.com Tele: 973 204-5463 |
#10
|
||||
|
||||
Quote:
wrenchnride: I currently have a KO3s turbo from a passat that i plan on using with an 034EFI EMS.
__________________
70 Std. Beetle 03 20th Annv. GTI |
#11
|
||||
|
||||
That should scoot you down the road!
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans 1962 SC 1776cc SP 944NA brakes, 993 wheels VKG |
#12
|
||||
|
||||
I also have the eagle kit. and I also have
1983 steel 944 trailing arms (same as vw) 1985 aluminum "951" trailing arms (turbo) stock vw trailing arm. I was just gonna make new spring plates from an old set of 911 ones I had If I used the alu arms....but what I wanna know is how are people bolting the alu 944 arms on? the bushing is wider, just use washers and a longer skinnier bolt?? or are people welding on diff. brackets?? I might just end up with the early stell 944 stuff so I can narrow them.....so I can fit the 16x7's on a notchback |
#13
|
||||
|
||||
nevermind handled it myself. there's more than 1 way to skin a cat
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|