#1
|
|||
|
|||
My Project....Superbeetle Conv. 2.4l with EFI - Megasquirt
Hi,
don´t know where my oldeer Thread is, so i will show you some Information about my project. First my Convertible Full Docu about the resto at http://kcc-niederrhein.de/index.php?...egory&catid=19 Last Winter build a Typ4, 2.4l ..hooked up a efi best regards Markus
__________________
http://www.carbonworks.de Interior Goodies in 100% cfk for your Superbeetle http://www.kcc-niederrhein.de Käfer Cabrio Club Niederrhein Germany Last edited by maniac; April 19th 2011 at 10:37. |
#2
|
|||
|
|||
Heres a pic from the dashboard
__________________
http://www.carbonworks.de Interior Goodies in 100% cfk for your Superbeetle http://www.kcc-niederrhein.de Käfer Cabrio Club Niederrhein Germany |
#3
|
||||
|
||||
Very nice work. Love the dash.
__________________
NO_H2O 72 1302 Smack Black GL 73 Bus (2L CIS Powered) 66 Beetle, 73 Standard Beetle 72 Pinzgauer 710M Volksport Kafer Gruppe |
#4
|
|||
|
|||
will make same better pics, cause this pic is from the last year and a little bit dirty
__________________
http://www.carbonworks.de Interior Goodies in 100% cfk for your Superbeetle http://www.kcc-niederrhein.de Käfer Cabrio Club Niederrhein Germany |
#5
|
||||
|
||||
great looking car! Love the dashboard, it is similar to what I did a few weeks ago Mine still needs some upholstery and one of your CF panels tho :P
__________________
www.vw1303s.com |
#6
|
||||
|
||||
Great job, I'm going to go through all of your gallery now!
Rich
__________________
http://www.ricola.co.uk |
#7
|
||||
|
||||
Love the wheels, what are those?
Jason
__________________
If I could just get paid for my sleepless nights.... 1960 VW Bug UBRDUB Walkaround 1st Drag Run Dyno Run Oval Ragster-'57 Rag/'04 Boxster S |
#8
|
|||
|
|||
Wheels are Tomason, located in Germany Essen. Its a local Enterprise
Dimensions are 8.5x18 ET35 in front and ET15 an the rears
__________________
http://www.carbonworks.de Interior Goodies in 100% cfk for your Superbeetle http://www.kcc-niederrhein.de Käfer Cabrio Club Niederrhein Germany |
#9
|
||||
|
||||
well done
|
#10
|
|||
|
|||
What the hell
After first Startup...ecu runs fine, but no oilpressure Only 0,5-1bar pressure at 2000 rpm....that sucks
__________________
http://www.carbonworks.de Interior Goodies in 100% cfk for your Superbeetle http://www.kcc-niederrhein.de Käfer Cabrio Club Niederrhein Germany |
#11
|
|||
|
|||
Hi Markus! You guys should see the car in person,it´s very well done! Did you bleed the oil lines and oil cooler properly Markus? Also check your oil pressure gauge or swap it with a gauge that you know works.
Another possible reason could be that your pick up tube inside the case isn´t properly fit or too high above the sump.The pick up tube may not be able to suck enough oil if it is not properly installed.That would be a problem because you may have to open the case again.I hope that´s not the reason and it is something simple.. Last edited by 70Turbobug; June 15th 2010 at 05:48. |
#12
|
|||
|
|||
I love this dash, can we get more pictures? You did this with 914 gauges correct? I've seen a few custom dashes like this on here and would love to see an in-depth "How to/DIY" from start to finished product cause I would like to do the same for my project Mike |
#13
|
|||
|
|||
we have opened the case again and hope to find the problem
one of the plugs blocks the oilchannel (only 50% of the diameter are open) @Turbo we have checked all things befor open the case again.. Have to drill out the plug and hope that the oilpressure will ok now. Another little Proble was the Mahle bearings... seems they are not fitting like K&S bearings, 6/100mm smaller in diameter than the K&S bearing...that sucks Change also the mahle bearings to kolbenschmidt
__________________
http://www.carbonworks.de Interior Goodies in 100% cfk for your Superbeetle http://www.kcc-niederrhein.de Käfer Cabrio Club Niederrhein Germany |
#14
|
|||
|
|||
Engine is back in car and oilpresure ist fine...
cold engine= over 5bar Next friday we will programing the EFI. Car runs up fine already, only need to program some finetuning bst regards markus
__________________
http://www.carbonworks.de Interior Goodies in 100% cfk for your Superbeetle http://www.kcc-niederrhein.de Käfer Cabrio Club Niederrhein Germany |
#15
|
|||
|
|||
**** happens...
at 3500 or lest at 5000 rpm, engine ecu gets offline... no idea why....grrrr think theres an electric bug in the system...alternator damaged no load Sometimes the vr is not registring the tooth... for the video-junkies. Video "first run" http://www.youtube.com/watch?v=gcRMUnd_A70
__________________
http://www.carbonworks.de Interior Goodies in 100% cfk for your Superbeetle http://www.kcc-niederrhein.de Käfer Cabrio Club Niederrhein Germany |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|