GermanLook Forums  

Go Back   GermanLook Forums > Technical Section > Electrical

Reply
 
Thread Tools Display Modes
  #1  
Old August 1st 2004, 12:11
Bill K.'s Avatar
Bill K. Bill K. is offline
Registered User
 
Join Date: Jun 2004
Location: Woodinville, Wa
Posts: 210
Smile Gauge Art

Gauges are back from North Hollywood Speedometer. I'm very happy with how they turned out.





This is a mock up with the 914 panel painted silver. They'll be installed in a billet aluminum panel under development. A Raptor shift light will go between the tach and speedo and the trip reset will go below the dash. The new housings have stud mounts on the back for clips to hold the gauges from behind the panel. They are lit by blue LED's like the new Jetta. These started off as $30 e-bay junkers. Truely amazing work by NHSpeedo. :bowdown:

The quad gauge is a NHSpeedo special. The idiot lights are for generator (alternator), oil pressure, master cylinder, and cylinder head temperature. The CHT light is driven by a dual SPA temp-temp gauge connected to cylinders 1 & 3. The SPA will be mounted under the dash in a pod. Other idiot lights are standard setup.

I'll post again when they're installed.
Reply With Quote
  #2  
Old August 1st 2004, 13:06
zen's Avatar
zen zen is offline
Registered User
 
Join Date: Jul 2002
Location: atlanta, ga
Posts: 2,946
SSSAAAA-WWWWEEETTT!!!!!

very nice. i like the direction you went with the combo gauge. :agree:
__________________
zen
'73 2316 TIV GL Standard Bug (quasi)


Company Branding, Graphic Design, and Web Services at DigiVinci Design
Reply With Quote
  #3  
Old August 1st 2004, 18:51
NO_H2O's Avatar
NO_H2O NO_H2O is offline
Administrator
 
Join Date: Aug 2002
Location: Stockbridge, GA.
Posts: 2,810
Very Nice. I would liove to know what LED's they used, I have wanted blue LED backlighting for mine for a while.
__________________
NO_H2O
72 1302 Smack Black GL
73 Bus (2L CIS Powered)
66 Beetle, 73 Standard Beetle
72 Pinzgauer 710M
Volksport Kafer Gruppe
Reply With Quote
  #4  
Old August 1st 2004, 18:58
yetibone's Avatar
yetibone yetibone is offline
Registered User
 
Join Date: Aug 2002
Posts: 705
That's sick dude! Very impressive guage cluster. I'm green man!

I must say, the combo guage looks like close kin to a pre-'85 924 or 944 combo guage. Regardless, it's well suited to a Bugs limited dash space.

They're simple, yet they're tricked out just enuff to be unique. Very well done :agree:
__________________
Yetibone
'71 1302S 1.8
'73 1303S 2.3
'83 928S 4.7
Reply With Quote
  #5  
Old August 1st 2004, 19:00
thomas_niji thomas_niji is offline
Registered User
 
Join Date: Jan 2004
Posts: 35
very beautiful indeed!! i wish i have the dough to do the same thing man!

how much did the whole thing costed you?
__________________
(O\ /O)
"When I grow up I want to be a German Looker."
Reply With Quote
  #6  
Old August 2nd 2004, 04:41
Mikey 1972GL Mikey 1972GL is offline
Registered User
 
Join Date: Apr 2004
Posts: 133
I'm not much for white faced gauges, that being said...

Those look awesome!! I hope they didn't break the bank, I would like to have a similar set for myself. I like the way they're layed out. I really like the combination gauge; oil preasure, tempature, fuel, and voltage. Looks better than Gauges just hanging out all over the dash.

Also, If you don't mind me asking. How much did the whole thing cost?

Mike
__________________
My new user name, Mikey
for some reason, I havn't liked this name since I made it.
Sorry for any problems... Mike
Reply With Quote
  #7  
Old August 2nd 2004, 11:48
starmember's Avatar
starmember starmember is offline
Registered User
 
Join Date: Aug 2003
Location: De Wilp Groningen
Posts: 135
Thumbs up

like we say in holland "super gaaf". :agree:
__________________
90 in to te corner.
Reply With Quote
  #8  
Old August 2nd 2004, 14:21
Bill K.'s Avatar
Bill K. Bill K. is offline
Registered User
 
Join Date: Jun 2004
Location: Woodinville, Wa
Posts: 210
I spent a lot of time researching the different options and in doing so I became a gauge lover. I looked into VDO, Autometer, Westach, SPA, Stack, and Porsche 914. The 914 stuff beat out the other options because:
* Biggest tach diameter available
* OEM/GL look -- clean, simple cluster
* All gauges from same maker

Then I found the Quad guage by NHSpeedometer. I was hooked on the integration of fuel/volt/OP/OT with idiot lights. The blue LED/white face combo was the closer. I just had to.

Here's the bill:
Speedo rebuild and calibrated for wheel size - 130
Speedo trip reset cable - 45
Tach rebuild with board for optical distributor - 135
Quad calibrated to OP/OT senders - 500
LED lighting/white faces - 300
Custom screen print art (VW logo & idiot labels) - 75
Bezels with glass faces - 45
VDO OP/OT senders - 40
Total nut - 1270

It still sounds crazy to me that I spent that much, but I'll forget about it soon and enjoy the gauges for a long time. This is a special project for me, so I'm emphasizing a high-end driver interface (gauges, steering wheel, seats, shifter).

NO_H20 -- I don't know the blue LED's used. They look sweet though. The tech said they were soldered to the stock bulb holders. I imagine its a trick install on the inside. He said the blue VW logo gets ghosted when the lights are on and it's dark. I'll try to get a picture when I install them.

For the custom panel, I'm going with a clear anodized, lightly bead blasted aluminum for a matte silver finish. The dash is smoothed and painted Porsche Lapis Blue.

Thanks for the :agree:
Reply With Quote
  #9  
Old August 2nd 2004, 14:54
starmember's Avatar
starmember starmember is offline
Registered User
 
Join Date: Aug 2003
Location: De Wilp Groningen
Posts: 135
it looks sweet but 1270 that is too much. ^^^----- brain death (just kidding)
__________________
90 in to te corner.
Reply With Quote
  #10  
Old August 2nd 2004, 15:35
Soul Soul is offline
Registered User
 
Join Date: Jan 2003
Location: Hinsdale, IL
Posts: 53
I love the way they turned out for you. I'd have to do it the low budget, section 8, ghetto way! $1270.00 is waaaay out of my leauge! Damn they look sweet though!
Reply With Quote
  #11  
Old August 2nd 2004, 16:00
starmember's Avatar
starmember starmember is offline
Registered User
 
Join Date: Aug 2003
Location: De Wilp Groningen
Posts: 135
how about this one $625.00
Attached Images
File Type: jpg STR6D-VWlarge.jpg (13.6 KB, 187 views)
__________________
90 in to te corner.
Reply With Quote
  #12  
Old August 2nd 2004, 16:08
Soul Soul is offline
Registered User
 
Join Date: Jan 2003
Location: Hinsdale, IL
Posts: 53
I'm not into the Star Trek/Night Rider look, it's a decent enough price IMO.
Reply With Quote
  #13  
Old August 3rd 2004, 17:55
samcat's Avatar
samcat samcat is offline
Registered User
 
Join Date: Aug 2002
Location: Bristol, UK
Posts: 395


YUM!

I like those lots!

Cya,
sam C
__________________
1973 1303 (super beetle) in Jaguar British racing green,
Raby 2270, B spec gearbox, Lots of carbon fibre, Wolfrace Octane Black 17x7.5, Goodyear Eagle F1's, Kerscher suspension front and rear, kamei airdam in carbon, corbeau seats, momo millunium steering wheel.
CDT eurosport 6.5 front speakers, IDMAX 12D2 sub, rockford old school amps.
Reply With Quote
  #14  
Old August 3rd 2004, 22:26
SuperRSi's Avatar
SuperRSi SuperRSi is offline
Registered User
 
Join Date: Sep 2002
Posts: 518
Wow the white faces on those gauges look great. I would not have thought so without seeing them.

I also went with North Hollywood and waited for months and months and months. Did not ask how much it was going to be and did not open the invoice when they came in. Holy She-ite when the credit card bill came and my fiance was curious and told me the total. We were both shocked. But I agree, I will enjoy looking at them for years hopefully. I am working on installing them in my Kerscher 911 dash on my 79 convert. I went more classic black with the silver bezels.

Thanks,

Randy
Attached Images
File Type: jpg vdogaugescombo.JPG (59.7 KB, 192 views)
__________________
Meyers Manx Signature #85 , 79 Convert
Reply With Quote
  #15  
Old August 4th 2004, 02:56
Supa Ninja Supa Ninja is offline
Registered User
 
Join Date: Aug 2002
Location: Houston, TX
Posts: 627
Bill those guages look tough. I've seen the LED's on ebay and i'm going to buy 20 of then, and use my soldering skills and some original bulbs and make my own. I know 1200+ is way out of my budget, so I'm going to settle with my early 944 guages, with the $20 price tag. Can't wait to see how your bug turns out.

Nick

Last edited by Supa Ninja; August 4th 2004 at 19:46.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 13:54.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved