Performance Engine Coatings wearth is or not??

[Troy_Audio]

Hey,Power crazies

A buddy of mine sent this link to me..
tell me what you think..
>>Performance Engine Coatings<<

Peace Troy

[craazy Cooter]

Good for high heat and presure in the combustion chamber, like turbo or supercharger setups, not for street engines. You really can't take full advantage of these types of coatings unless you're racing full time.

[Troy_Audio]

"You really can't take full advantage of these types of coatings unless you're racing full time."

Would halp keep it klean?
last longer.. or am I thinkin of this product in the wrong form..
I tend to keep getting more infected with High Speed so you never know.. you know..lol

When I get ready to go ful flow,Cam/gear,New Juggz, ect ect..
would it be wearth it?
Thanks keep the coments commin..
Peace Troy

[craazy Cooter]

For the high price and small gain, it's not worth it. You don't have a turbo. Look up cryo-rem or cryogenic treating, or nitriding if you want to spend money. Youre better off using that monet for redline sequential fuel injection or a porsche type fan and shroud. Is the engine cleaner with these coatings?
The oil shedding block coating allows the block to be cleaner, but as long as the engine is running and heating up and burning and creating carbon, it's going to be dirty, so the thermal coating won't really keep the chambers clean. On the other hand, if you rout your breather box to your carbs, the intakes and chambers will get nasty after awhile. Best thing is a small electric vacuum pump attatched to the breather system. You gain power from it too.
There are MANY other more effective, not to mention cheaper, ways out there to gain power.


You were smart to go with the dis ignition. Can you use an MSD box with it?