#1
|
||||
|
||||
motors in but will not start *she runs now*
well i finally got my motor back in everything is hooked up as it should be.
the engine is trying to fire but sounds more like a misfire. also the fuel line coming up from the pump has a filter half way up and the filter is only half full. i know there is gas in the carb since it will squirt out when i open the linkage all the way. i've check my plugs wires and firing order everything seems good the distributor is in correctly as the number 1 cylinder is at tdc when it should be any ideas?
__________________
Last edited by volksdragon; September 30th 2005 at 16:39. |
#2
|
||||
|
||||
it was probably a combination of a dirty carb and a bad dizzy. it cleaned the carb last night and swapped in my vacum advance dizzy and what a differance. she's running and she'll idle. i still need to make final adjustments.
__________________
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|