|
#1
|
|||
|
|||
Who is running 15x7 fronts?
I have a set of 15x7 et52.5mm phone dials with a 2" narrowed BJ beam with a 2-3" drop, 944N/A front disks on my 61'beetle with a 69' IRS pan.
Just wondering if anyone is running something similar, and tire size experiences. Thanks Mark |
#2
|
|||
|
|||
So nobody has 15x7"s on the front?
|
#3
|
|||
|
|||
I've never run that particular combo, but I know a 7"et42 on a 3" beam tucks stock fenders, and on a 2" beam it just fits. You will probably need spacers to get the deeper offset wheels away from the lower control arm so you have a decent turn capabilities.
Lanner |
#4
|
||||
|
||||
yes im runnin that combomy tires rub they kinda stick out about an inch
__________________
YEAH ITS GOT A HEMI |
#5
|
||||
|
||||
Flat is right, I have a set of cookies. I stuck them on my Ghia just for kicks and they catch the lower ball joint. Almost sit on it. Stock beam, with lowered spindles. I had to buy a 16" or larger spare because the 15" inflate-a-spare did the same thing.
__________________
Mike '04 R32 Tornado Red '02 New Beetle TDI - Daily driver '64 Ghia - Project!!-Subaru EJ20T, MS/EDIS, 993 brakes, 914 Tranny... |
#6
|
|||
|
|||
I know I'm okay as far as clearance to suspension and the fenders. I just need to finish assembly on my steering so I can find out how little steering I have nothing like waiting for parts..... again
Looks like I'll have to invest in some spacers and longer studs. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|