#1
|
||||
|
||||
Red9Design coilovers.........article coming soon
Just a little eye candy.......
I will have the articel done soon....I hope. Alex |
#2
|
||||
|
||||
you stumped up for the kit then?
happy with it? oh and did you get the updated kit with the stainless end bushings on the tiebars?? if not, get in touch with simon and he'll post you the new bushings.. the bronze ones have caused a few issues and are being offered as an upgrade for free. |
#3
|
||||
|
||||
Yummy teaser
__________________
Adrian Pillow '57 Oval Beetle - project '66 VW Westfalia - GL '96 GMC Sierra Crew Cab 6.5L Diesel '99 GMC Suburban 6.5L Diesel VolkSport Kafer Gruppe |
#4
|
||||
|
||||
I should have the stainless ones......which color are the bronze ones? I talked to Simon just after I heard about the problem and he told me that I am fine.
Look at the pic in the suspension gallery.....you can see them there. Alex |
#5
|
||||
|
||||
Does this mean you have given up with having double wishbones up front?
Here's mine so far: Rich
__________________
http://www.ricola.co.uk |
#6
|
||||
|
||||
I have given up on it. Not that I would not want it but my car is getting to close to get painted and my pan is already done.
It would get more expensive too so I decided to get the coilover kit. Alex |
#7
|
|||
|
|||
Alex,
So are you using the torsion bars at the front with the coil-overs? Or letting them swing free
__________________
Cheers Craig. |
#8
|
||||
|
||||
yeah you got the updated stainless ends alex..
will hopefully get mine at some point this year if i manage to sell my other bug.. |
#9
|
||||
|
||||
Kiwivw,
no...the torsion leaves are out and a replacement bar is inserted that has swivels at the end of them so that the trailing arms and swing freely up and down. Alex |
#10
|
|||
|
|||
Alex, how's the article going? I'm in the process of designing a similar setup and trying to decide what shocks and spring rates to use. I'll probably go with the same coil-over shocks from Simon. But I'm not sure what length and spring rate I need. I'm running 2 1/2 inch dropped spindles and want to drop it another 2 inches, maybe a little bit more. Do you or anyone else out there have any suggestions?
|
#11
|
|||
|
|||
hey guys, can you post a link to the website that does that coilocer kit? is it a bolt on kit or do i have to just find what i want and fab it together? also you were talking about that replacement torsion bar that you put in instead of the leafs, where would i get that if i decided to go coilover? thanks guys. Sam
__________________
speed is fun. why can't cops understand lol. '64 notch 2.5L T4 '70 bug 1776cc |
#12
|
|||
|
|||
I'd like to know who makes the shock and spring. Looks good.
__________________
John Helgesen - www.stahlwerks.com 63 356b time capsule 911 track car, getting a cage now 948 project |
#13
|
||||
|
||||
factman, the whole shebang can be bought from red9designs..
http://www.red9design.co.uk/ezrider.htm |
#14
|
||||
|
||||
The article will be posted next week. I will finish it this weekend.
Alex |
#15
|
|||
|
|||
Alex,
If you get a chance, could you post the model numbers of the GAZ shocks, must be on them somewhere. I'd like to know what weight they support. Thanks
__________________
John Helgesen - www.stahlwerks.com 63 356b time capsule 911 track car, getting a cage now 948 project |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|