#1
|
||||
|
||||
set up help
have a 03 with 944 running gear,tca's are also rose jionted on the inner end.
running 7x16 front and 8x16 rear,type 4 motor,stripped out interor. looking for some base settings on front camber and castor also toe.what should i be running the camber and toe at? car is going to be used for sprints/hillclimbs and track days so needs to have very good turn in. not so importent stright line stabilty. was thinking along the lines of 3*front camber and no toe in/out.and 2-3 camber on the rear with teo in. any ideas? cheers rob
__________________
my race car build galleryhttp://www.flickr.com/photos/1406263...7602662665607/ my web site www.rnjmotorsport.co.uk |
#2
|
|||
|
|||
Here are som links to the topic , good luck mr !
http://www.ozebiz.com.au/racetech/theory/align.html http://aircooled.net/gnrlsite/resour...s/handling.htm |
#3
|
||||
|
||||
both links give good guides into what dose what,but what im after is a starting point,somthing to work from.was hoping someone who is still active in the kafer cup or simaler is out thare and is willing to help.
cheers rob
__________________
my race car build galleryhttp://www.flickr.com/photos/1406263...7602662665607/ my web site www.rnjmotorsport.co.uk |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|