View Full Version : Mallory Unilite Vacuum with Dells
richiep
February 26th 2003, 05:43
Anyone know if you can use a Mallory unilite vacuum dizzy with Dellorto 40DRLAs?
If so, how do you dial in the adjustable Vacuum?
Thanks.
samcat
February 26th 2003, 07:48
I have been assured that you can.
I currently run a mallory unilite optical with vac advance. vac is disconnected (weber 40's at the mo)
I have a set of dell 40's which we are refurbing at the mo which I will be chucking on.
You NEED to take the vac signal from all 4 barrels (2 on each carb), and use the thing they have on an alfa for merging the signals and smoothing the pulses.
Cheers for now,
Sam C
paul_f
February 28th 2003, 14:37
On the dells you only have one vacuum takeoff for advance, and the alfa part is an anti pulse valve.
samcat
February 28th 2003, 15:01
Originally posted by paul_f
On the dells you only have one vacuum takeoff for advance
Unless you add your own ;) Gives a much stronger signal then
Originally posted by paul_f
and the alfa part is an anti pulse valve.
Yup, thats the one! :D
Cya,
Sam C
paul_f
February 28th 2003, 16:46
So have you just drilled each barrell? Are you going to use 4 anti pulse valves?
If you have a Mallory dizzy I can't really see the point in doing this - you can adjust the advance for a particular amount of vacuum quite easily - surely it would be best to keep it simple like on the alfa?
Paul
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.