Quote:
Originally Posted by Sandeep
I can't recall the exact TOB measurements but believe its ~ 40mm compressed height and ~ 60mm extended length, will need to look at my notes.
I woukld like to upgrade the power in the future  but am not sure if the Kennedy twin clutch set up is any difference (installed depth wise) from the setup that I will currently run ? |
Yes, mine was ~40-41mm fully compressed as well iirc, so that must be right.
Kennedy twin clutch IS the same thickness overall, BUT.... (large but) only if you use twin thin black magic disks... There, you found the reason I went BM...
If you want twin organic, leave ~6mm (5mm MB vs 8mm organic times two)more meat on the bell housing