|
|
|
|
#1
November 19th 2003, 15:16
|
||||
|
||||
|
My cooling ducts
Here are my front ducts...
|
|
#2
November 19th 2003, 15:28
|
||||
|
||||
|
The backing plate... I got stock Ghia backing plates, and welded some 2.25" exhaust tubing to them, then I cut the holes. I used
some 2.5" silicone hose from Racers Wholesale to connect the scoop to the plate. The scoop is the inner fenderwell air intake from a 88 escort gt. I just pop riveted them on. No more fade. Yeah I know my rotors aren't cross drilled, but it still definitly helps brake temps when zooming in and out of traffic.
|
|
#3
November 19th 2003, 15:36
|
||||
|
||||
|
A front pic... You can see the ducts under my secondary lights...
|
|
#6
November 19th 2003, 18:53
|
||||
|
||||
|
sorry about picture quality- they're polaroids
|
|
#7
November 19th 2003, 19:56
|
||||
|
||||
|
So many good ideas, so little time.:silly:
__________________
I love my money pit, uhm, err, I mean my car. 1969 beetle in the works... 2.0 type 4 DTM...  2004 Suzuki GSX-R 1000 crashed  www.volksport.net Volksport Kfer Gruppe
|
|
#8
November 20th 2003, 01:29
|
|||
|
|||
|
Very nice jod on the cooling ducts...VERRY CREATIVE...I like that alot, I want to do that now!:goodness:
__________________
There is no cure for our disease '69 standard ( under the knife) '72 1302 GL ( under the knife and on hold) VolkSport Kfer Gruppe www.VolkSport.net
|
|
#10
November 20th 2003, 08:55
|
||||
|
||||
|
for those stripping 944/951 parts, my 951 uses a similar setup. they have a funneled intake in the nose. there is then a delector to redirect that pipe of air to the vented rotors. there is no hosing inbetween. you might be able to use those pieces.
|
|
#11
November 20th 2003, 11:23
|
||||
|
||||
|
The tires don't rub on the hoses. Amazing.
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Hybrid Mode
