|
Hello,
Im in the process of building a horizontal fan setup at the moment.
This is the second one I`m building. The first one I did was about 15 years ago and used a 5mm steel plate at the front of the engine. Pictures can be seen in the engine gallery/ 1302 convertible with turbo (still works and cools). The crank pulley needed to be shimmed out with 2 or 3 shims (can`t remember). Now I`m using a 10 mm aluminium front plate and will have to make a solid spacer as shimming would not allow the pulley to sit in the centre.
Hope this helps
__________________
Andreas
|
April 13th 2006, 08:22
Threaded Mode