Quote:
|
Originally Posted by Panelfantastic
the ECU controlled fans are coming on waaay too early, like 150 degrees. May need to go to a seperate controller. The sensor for temp to ECU is about an inch away from the sensor for my gauge, I watched the gauge and was able to see the temp drop exactly when the t-stat is set for (195), so the gauge and it's sensor are spot on. Either the ECU sensor is going bad or the ECU has a hiccup.
Jeff-
|
Do the temp. guage and the fans both run off of the same coolant temp sensor?
Does this sensor have less resistance as the temperature increases?
If so, couldn't you put a resistor between the sensor and ECU, to trick it into thinking that the coolant is cooler than it really is?
BTW: Awsome bus!
May 18th 2006, 02:25
Threaded Mode