|
Drilled 1/4 inch holes spaced about every inch in the pans today. Didn't think I was going to start welding, but I got anxious. Everything started off pretty well, until I heard the welds popping off as they cooled... The frame ledge is twice as thick as the pan itself, so when I thought the pan was welding in, I was basically just filling in the holes and taking my chances with it making a deep weld. I ended up just putting a bunch of stitch welds also, which worked much more easily... I think on the left side of the pan, I'm going to skip the drilling and just stitch weld the thing in... Might just try to do the entire side.
|
October 30th 2010, 02:47
Hybrid Mode
