#1
|
||||
|
||||
Type I engine parts
It's Holiday savings time for you Type I motor heads! Since I'm going type IV with my project, all this type I stuff has GOT TO GO!! Was going to build a 2007 cc EFI type I with this stuff, but last year stumbled upon Jake Raby's site. I've sold the rest of the engine parts already, and this is what I have left. There are some good deals here, check the going prices on Cip1's web site for this stuff. Picture shows everything together minus pressure plate, I have pic's of everything seperately (will post other pic's on request).
Ok here's the list: #1 AS41 dual relief case for 8mm head studs(not included) cast in '95 RIMCO did all machine work (have reciept) opened for 90.5 or 92mm cylinders clearanced for 84mm stroke lifter bores clearanced for high lift cam drilled and tapped for full flow oil galleys drilled and tapped W/plugs I will also throw in the case hardware kit (studs, oil relief springs pistons and plugs, etc...), and double thrust cam bearing set, and main bearing set STD.-STD. Plus, a scat engine gasket set! All this for $400.00 US (modified case alone is $580.00 US) #2 SCAT 4340 forged 78mm crank, type I mains STD, type I rod journals STD, nitrided, 8 doweled, and still in factory wax paper w/reciept (11 years ago ) Hold on to your hats... $500.00 US ( $800.00 US if you can get one) #3 Bugpack Pro Street Heads (044 casting from '83, bought in '95, have reciept) 40x35.5 ss valves, dual springs, cro moly retainers, opened for 90.5. The heads also have "hemi" cut chambers (have not been CCed), and hand ported intakes and exhaust. Heads have never been bolted on. These are going cheap! $250.00 US ( $250 US EACH on Cip1 web site P/N C12-4003-17) #4 Gene Berg (Schadek) 30mm oil pump plugged for full flow and blue printed. This is a steal... $45.00 US (I paid $70 US for it in '97) #5 CB Performance 5 1/2 lb. rotory fuel pump (quiet) Going for $25.00 US ( CB's price $50 US) #6 200mm 1700 lb. Kennedy pressure plate (three finger style) for '71 and later T1's New in box $40.00 US ($90 US new)
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans 1962 SC 1776cc SP 944NA brakes, 993 wheels VKG |
#2
|
|||
|
|||
Urgh... I am abput t obite off your hand for that crank, but unfortunately now is not a good time for me
__________________
Zeroaxe |
#3
|
||||
|
||||
Sorry about your financial position zeroaxe (I sort of have the same deal ). This might be cruel, but at least you get to see it.
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans 1962 SC 1776cc SP 944NA brakes, 993 wheels VKG |
#4
|
|||
|
|||
Urrrgghhhhh (drool) Thanks, but it is just because it is Christmas and EVERYONE wants their presents
__________________
Zeroaxe |
#5
|
|||
|
|||
Do you have any pics of the fuel pump, is it mechanical or electric? I am inerested in that and and possibly the cylinder heads what kind of a port job do they have and what kind of intake(s) did or do you use? any pictures would be great.
eric |
#6
|
||||
|
||||
It's a CB performance electric rotory pump set at 5 1/2 lbs. need regulator for carbs (most only need about 3 lbs.)
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans 1962 SC 1776cc SP 944NA brakes, 993 wheels VKG |
#7
|
||||
|
||||
The heads can run "as is", but I would recommend CC'ing chambers and shiming springs for cam that will run with them. The cumbustion chambers, and exhaust could be polished (more for drag racing though IMO). They have not been put on a flow bench to check flow characteristics. You would have to match port whatever manifolds you would be using for best results.
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans 1962 SC 1776cc SP 944NA brakes, 993 wheels VKG |
#8
|
|||
|
|||
Thanks for the info I am just running webber 44s on my motor so that fuel pump would be to much, and sorry but I think I am gaoing to run the heads I already have.
thanks again, eric |
#9
|
||||
|
||||
Well, the only items left are the SCAT crankshaft, and CB Performance timing gear set. ALL OTHERS ARE SOLD
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans 1962 SC 1776cc SP 944NA brakes, 993 wheels VKG |
#10
|
||||
|
||||
Still have the 78mm 4340 SCAT crank and timing gear set (both new). $500... you can't beat that with a BIG STICK
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans 1962 SC 1776cc SP 944NA brakes, 993 wheels VKG |
#11
|
||||
|
||||
Still have crank and gear set... $500 OBO.
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans 1962 SC 1776cc SP 944NA brakes, 993 wheels VKG |
#12
|
||||
|
||||
Crank and gear set are SOLD
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans 1962 SC 1776cc SP 944NA brakes, 993 wheels VKG |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|