FAT performance T4 shroud

[Sandeep]

Here's the decklid moon cut .. I used a dremel with a cutoff disc. It cut very well, neat and quick. I thought I'd have to get the decklid repainted but the disc didn't even discolor the paint. BONUS !








I haven't moved the licence plate up yet and have cut no holes behind it. I'll see hot the engine runs, and if I need more cooling air, I'll cut a hole behind the plate.

Notice you can only see the cut if you look from UNDER the licence plate light thingy ! The licence plate thingy was moved up about 1 1/2 " from the stock location.