|
|
|
|
#1
July 20th 2003, 06:00
|
|||
|
|||
|
Another option is transparent model car paint, such as from Testors.
|
|
#2
December 4th 2006, 12:21
|
||||
|
||||
|
these
I found these a little while ago, never got around to installing some 914 gauges on the bus, but when i do http://cgi.ebay.com/ebaymotors/Porsc...spagenameZWDVW Does anyone know if the stock transporter gauges use the same bulbs as the 914's? http://cgi.ebay.com/ebaymotors/Porsc...spagenameZWDVW
__________________
GermanlookT2
|
|
#4
December 4th 2006, 19:22
|
||||
|
||||
|
Hi
Years ago I bought some stuff from a speed shop called bulb dye, it was available in a few colours, but it did slightly dim the bulb output, not good when your getting on in years. Some paints may blacken with continued use. Steve
__________________
STI powered 1303 in the works.
|
|
#5
December 26th 2006, 20:20
|
||||
|
||||
|
Well i got rid of the bulbs and instead placed some blue leds, and for the gauge needle i placed a red led above the speedo. ended up looking like this
 Pic is blurry since it was taken a while ago with an old cell phone, and it really doesn't reflect the look. if you like it i could take a better pic.
__________________
________________________ 1990 Mex-Spec GL Bug "The Blue Flame": Engine: Planning Stage Transmission: Planning Stage Suspension: Front: 3/4 swaybar w/UrethaneBushings, Dropped Spindles. Rear:CB Camber Compensator. Lowered 2 splines Brakes: Front Brakes: 280mm solid rotors, two pot calipers. Rear: 280mm solid rotors, 1 pot calipers w/ebrake
|
|
#6
December 26th 2006, 21:54
|
||||
|
||||
|
Looks good from here :agree:
__________________
1970 T1 W/MassIVe 2913cc RAT/?EFI? w/direct fire (very soon) and 915 trans  1962 SC 1776cc SP 944NA brakes, 993 wheels VKG
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Hybrid Mode
