Painting/Coating 944 S2 Calipers

[jhelgesen]

I just cleaned up a set of 944 turbo brembos. I had to strip off the clear with aircraft stripper, then I recoated them with caliper paint using one of the popular paint kits available from ebay and pelican parts. They came out okay, but I wasn't thrilled with the results. Paint is very thick and they give you an epoxy brush to apply it with, had to apply 3 coats. I would have prefered something to spray.

As far as the porsche logo, they have to be replace if they are a decal, again, something I've seen on ebay, sure they are available other places.