Scored some seats

[zen]

just bolted one of mine in last night with that setup. its nice and tight. i was concerned about pan flex. i don't love the design, but it works.

[yetibone]

I think Genius' idea is where it's at. That's how I did the 1302's E36 Beemer seats. Four pieces of angle iron, and some tracks off some old seats.

Cutting the old seat frames about 2" vertical from the tracks made 'em just the right height. Now, with so much adjustment, I can put either seat as far back as the leading edge of the back seat, or as far foreward as 12" from the dash

I couldn't bring myself to drill holes in the 1302's perfect floorpans.



Yetibone

[boygenius]

Originally Posted by yetibone

I think Genius' idea is where it's at. That's how I did the 1302's E36 Beemer seats. Four pieces of angle iron, and some tracks off some old seats.

Cutting the old seat frames about 2" vertical from the tracks made 'em just the right height. Now, with so much adjustment, I can put either seat as far back as the leading edge of the back seat, or as far foreward as 12" from the dash

I couldn't bring myself to drill holes in the 1302's perfect floorpans.



Yetibone

After I spent probably 25 hours painting and wet sanding my floorpans I couldn't even think of drilling holes in the floor or the rails. I might be a little anal retentive but you can read the time on your watch in the paint on my floors, even the bottom.

[NO_H2O]

I don't want to drill mine either. They ain't shiney but they are perfect and original. I will try to score some donors tomorrow and see how it works out.

[Supa Ninja]

I did like boy genious and i like how mine turned out. I have a friend with a 99 gts and i like his seats. I'm using '89 Sprint Gti seats and they look good in my Supa.