e-brake ends to 944T

[danielzink]

Maybe this helps......maybe it doesn't....maybe I went about it the hillbilly way...you tell me.

I had CB Performance discs on my car.
I went to 944T 4 pots.
I don't know what ebrake cables CB uses in their kits but I found a way to utilize them.

Here's the CB cable and end.


I shortened the parking brake tube on the 944T backing plates


I ground a little flat in the ebrake cable end and welded a bolt to it


Fed the bolt up through the bottom of the ebrake pull and put a nylock nut on it


then safety wired the cable to the original bolt in the backing plate so it wouldn't move around or pull out




Works like a dream !!

Dan