"Großes Wochenende"

[boygenius]

Well I had a blast all weekend. I was over Daves house on friday trying to get the oil cooler installed. We got the cooler with fans in but the oil kept on coming out of it. I drank my fair share of 10w-40 engine oil while under the car, kinda tastes like chicken. The car show was great even though nobody was selling what I was looking for. I am now red as a lobster since I always forget to use sunblock untill it is too late. It was fun finaly getting to meet the rest of the group in person. Mike had some real "M.U.A.D" spirit for taking his fully loaded beetle through the mountains with all of the steep hills and sharp corners. :agree: Go-karting was fun and I have the bruises to show for it. I had a blast and I think I would have beaten you Zen with another couple of races. Next year lets de-restrict the karts when we show up so we can have even more bruises... I mean fun... I agree lets make this a yearly event.


Glad to have you abord Nigel.

P.S. It only took me 8 hours to get home from the show so the drive isn't really that bad from my house. It would have been 7.5 hours if there wasn't an accident on I-75 50 miles from my exit.

Big thanks to Dave for putting me up for the night and giving me a hot meal. Nothing like eating dinner and watching F-1 racing. Also thanks for the traffic check, I flew through through 475 without a problem. The problem was a broken down truck that was in the break down lane so I kept the car at 80 mph to 90 mph the whole way down.


I had a blast lets do this again.

[NO_H2O]

Thanks for the help Brendan, Nothing like a hot meal of Brats and 10W40 You are welcome at my place anytime.
I think that Mike should get the Man-Up-N-Drive award for this one. :agree:
I think I might run up to AeriQuip in the morning and see what kind of fittings they have.

[boygenius]

Originally Posted by NO_H2O

I think I might run up to AeriQuip in the morning and see what kind of fittings they have.

Good luck I hope you find what you need. So are you going to try to find a 5/8" to 1/2" barb fitting and run it the same way we had it.

[NO_H2O]

No. I'm going to replace the old RX7 lines. I'm going to see if they have something to thread into the cooler. If they don't I will have AN's TIG welded on the cooler.