![]() |
|
|
|
#1
|
|||
|
|||
|
Ok, so you have topline front discs with the porsche (5/130) lug pattern correct? what are you going to use for the rear brakes?
You wont need to use maxx struts with the 16/6 early offset (im fairly sure its 23mm offset with that wheel) But you might need a little wider fenders, but im not sure becusue of your brake setup. Best thing to do is stick the wheels on the car and figure it out really, since you have the wheels right? you want at least a 1/8- 1/4" of clearance from the tire to the front strut spring. For coil overs... are you asking about the REAR? as the front IS a coilover? Later, Jonathan
__________________
FULL SPEED AHEAD, HARD AND FAST! Current cars: -74 Super Beetle -86 Vanagon Syncro -64 sunroof bug -73 thing |
|
#2
|
||||
|
||||
|
Offsets
16X6's run a 36mm offset. You'll prob need a small (5-10mm spacer onto stock disks) to stop them hitting the stock diameter springs.
MG
__________________
Modification is a form of art. Performanceghia is still alive and kicking... |
|
#3
|
||||
|
||||
|
23mm is for the 7" wide fuch, not the 6"
__________________
WinterJam 2010: Vdub, Surf, Skate & Musis Fest WinterJam 2010 'I drive way to fast to worry about cholesterol!' '67 Sunroof Notchback * '68 FI Squareback |
|
#4
|
||||
|
||||
|
I think we've been here before
MG
__________________
Modification is a form of art. Performanceghia is still alive and kicking... |
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|