|
I have early 944 brakes on my balljoint front end. All you need is some spacers to fit the hub bearings and seal to the VW spindle. Mounting the caliper will take some measuring and fabrication but not a big deal. I did mine on CB dropped disk brake spindles. I think it would be easier to mount the 944 calipers on drum brake spindles. There are a couple of pics of my set up in the brake gallery, first page at the bottom. It's the spindle with the caliper mounted low.
ken
Last edited by kdanie; December 7th 2004 at 00:18.
|
December 7th 2004, 00:15
Hybrid Mode
