|
|
|
|
#1
January 31st 2005, 21:13
|
|||
|
|||
|
Dude...I'm thinking about doing the turbo in the backseat section too. Do you have anymore pics (or links to pics) of the setup? How much hp do you think you'll have? How much boost? Thanks!
Matt F. 
|
|
#2
February 1st 2005, 00:03
|
||||
|
||||
|
Good to see you back. Nice progress on the car. :agree:
__________________
NO_H2O 72 1302 Smack Black GL 73 Bus (2L CIS Powered) 66 Beetle, 73 Standard Beetle 72 Pinzgauer 710M Volksport Kafer Gruppe
|
|
#3
February 1st 2005, 08:34
|
|||
|
|||
|
How much bhp do i have matt, thats what i would like to know myself, the engine is in the prossess of being finished of i have put the motor spec below.
i cant wiat to run it(i hope it works)  i have a load of photos of the bulkhead area matt if you want to see more its great for gaining alot of space Type 4 case 71x96 Balanced and Blue Printed CSP Deep sump with turbo oil return BAS oil filler pipe Hand made stainless steel exhaust manifold ending in Bentley R Turbo tailpipe GAC Engineered Heads 45in x 37ex La performance pulley CB air boxes Scat manifolds Engle FK7/8 Turbo grind on straight cut gears Shadeck oil pump Kobelshmitt bearings Total seal rings Bosch fuel filter Fuel pump CSP carbon fan shroud Latest model 911 air cooled 12 blade fan Samco black turbo hoses 8 inch Carbon air box/filter IHI RHB5 Turbo charger from Subaru legacy turbo CSP Throttle linkage Bosch heated lambda probe Omex coil pack, air temp, oil temp, map sensor TWM throttle position sensor TWM 45mm quad injector Throttle bodies TWM fuel rails 4x Cosworth green injectors DTA ECU Bailey Re-circulating dump valve One off Custom Charge cooler Custom wiring harness Bosch 12volt water pump Polo 1.4 Radiator Renault 5 turbo fan Custom Blue silicone water hoses i may have left a few bits out but hey i cant type anymore........ NUTTA
|
|
#4
February 1st 2005, 12:33
|
||||
|
||||
|
Nice stuff, I'm very curious how it will run....
What kind of clutchcombo are you going to use? Grtz Robin
|
|
#5
February 1st 2005, 13:55
|
|||
|
|||
|
Hi Blu ,clutch is Porsche 911 and the flywheel is from kennedy the gearbox is a 911sc 915unit thanks
|
|
#6
February 1st 2005, 13:57
|
|||
|
|||
|
oops forgot to add the photo
|
|
#7
February 1st 2005, 14:18
|
|||
|
|||
|
The progress is looking good. I'm going to removable rear clip as well, it makes engine removable/install, maintance, rejetting, checking spark plugs... a whole lot easier. That front spoiler is wild, I like
 . Looks like that engine is going to be a monster. Keep us updated.Nick
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Hybrid Mode
