|
|
|
|
#1
February 27th 2005, 17:26
|
||||
|
||||
|
Hi all,
Just wanted to anounce a small update on the Apfelbeck project with some new 3D Graphics...  www.Apfelbeck.nl 
|
|
#2
May 1st 2005, 15:49
|
||||
|
||||
|
Another update on the Apfelbeck Project...
Some of you might have seen the first pictures of our new Cylinders on Jake's forum at the STF, but some better Pictures are available now on www.Apfelbeck.nl  As well as a new look on the Home page   Enjoy! The Apfelbeck Team
|
|
#3
May 3rd 2005, 10:09
|
||||
|
||||
|
wow. very cool stuff. great progress. looking forward to more info as it becomes available. these are the type of innovations that will keep this hobby alive.
if i can include any pics in the GermanLook.com gallery, let me know which.
|
|
#5
May 4th 2005, 10:47
|
||||
|
||||
|
No, the development of the cylinders is totally separated from the heads.
Its was also (amongst other reasons) an opportunity to see how our selected aluminium casting company would produce something with as close a finnage as possible since there are limitations with sand casting. We (and the casting company) had our worries with the cylinder mold, but the very first result is already better than I (and we) expected and that is also very good news for when the final mold for the Apfelbeck head is finished and is the reason we were very exited about the cylinder result  Best regards, Walter
|
|
#6
May 10th 2005, 12:43
|
||||
|
||||
|
Great idea to do a 98mm cylinder, similar to those done back in the day by ottinger (sp?), but to encapsulate the head studs to provide additional rigidity, especially if you get the desire to put a turbo on there. The only thing I will be curious to see is how well they cool, since we actually de-encapsulated the head studs on all our 930 cylinders to provide better and more even cooling. It was only with the 993 (3.6,3.8) that they absolutely have to be encapsulated, as there just isn't enough meat to seal them off otherwise. Are you going to go one step futher and flame ring the cylinders and heads, to ensure proper sealing. One could easily use some from 3.4 cylinders and adapt them to work. They would be overkill with the registers you've used :-)
Charles Navarro LN Engineering http://www.LNengineering.com Aircooled Precision Performance
|
|
#7
May 11th 2005, 05:22
|
||||
|
||||
|
Quote:
What do you mean by a 'flame ring'? If you refer to the late 964 and 993 cylinder-head seal that is embedded into the top of the cylinder wall, then the answer is yes, but not the same ring/material will be used .Also the cylinders may probably not be Nikasil coated, but with a substance of even less friction, at least as hard as nikasil and lower cost (for our 4 seperate cylinders at least). Its a bit experimental, so I/we can't say/know much more about it yet, but we love this kind of thing and it will be fun to see if it works. Regards, Walter Last edited by Wally; May 12th 2005 at 12:23.
|
 |
| Currently Active Users Viewing This Thread: 7 (0 members and 7 guests) | |
|
|
Hybrid Mode
