Making my own rollcage!!!

[Racelook]

So finally I had some time to get on with the cage again.

At first an brither pic of the cross in the cage (not totally ready yet).
http://www.keversite.nl/fotoalbum/fo...2005230215.jpg

And anbetter pic of the welding on the back wheelarces.
http://www.keversite.nl/fotoalbum/fo...2005230528.jpg

At first I had maked two other holes in the dashboardplate so that the tubes from the struts can go to the cage.
Pic from the inside (driversside).


Pic from trunk (driverside)
http://www.keversite.nl/fotoalbum/fo...2005230812.jpg

Also we had bendend 2 tubes that will go in front of the doors from the a- to the b-pillar.


After that we welded brackets on the tube at the a-pillar. So that the tube from the strut can be mounted to the cage.
Driversside
http://www.keversite.nl/fotoalbum/fo...2005231044.jpg
Passengerside
http://www.keversite.nl/fotoalbum/fo...2005231132.jpg