rack and pinion on 02

[Steve C]

Originally Posted by Jeza

Thanks Steve

I hope you don't mind, that is your new project I have linked to above

Hi Jezza no worries, thats what looked like after sitting in shed for 19 years.

The guy who owned my 1303 before me spent a couple of days on his wheel alignment machine to get the rack in the correct place so that there was no bump steer.

The Ackerman problem showed up when I 1st fitted the rack, going hard on highways the inside front wheel would give a little chirp if I crossed the centre line, this was chased back to a slightly bent strut and too much caster.

Steve