Aerodynamics of a bug

[Uber Affe]

Originally Posted by bow

i say put a scoop under the car and make it an air conditioner and it would spoil the air under the car also look for pic's of the under part of lambo's

That sounds great in theory, but I had a leak in the seam of my right front floor panel that used to leak and gurgle water like a babling brook when I hiy a puddle and it was quite high off the ground as y suspension was stock.
I'ts raining cats and dogs right now and I guarantee the H2O would fill up like a jet in a jacuzzi w/ an intake underneath...EVEN with some kinda trap on it.

[bow]

put a flap to release the water on days it is raining

[thelazerviking]

thelazerviking Research and Design team presents...






tada.


no fancy spoilers venturis diffusers wahtever the hell.

instead of your fenders being restrictive they can be used for downforce.

....and a duct to cool the brakes off and help air flow can also be incorporated into the green area.

you can reverse the whole thing for the back of the front fender to create better airflow and vent out that fender too indstead of those louver ideas and junk tghat probably won't work so well



stop trying so hard.

[LOAF]

Lazer..

Where in NJ are you.. it is great to know that there is someone else from NJ..

Alex

[beetle1303]

something I was thinking of doing is shown in the pics below. I know the pics are from a 911 rsr, but the basic idea is the same. In order to take things to the next level I would like to have an inner fender, as the cars have positioned in front of the wheel (looking the car from below). This would minimize air turbulance above the fake bottom in front of wheel

Any comments are welcome

Chris

[beetle1303]

Originally Posted by thelazerviking

you can reverse the whole thing for the back of the front fender to create better airflow and vent out that fender too indstead of those louver ideas and junk tghat probably won't work so well

I was thinking of making the front wings as the 935 K3 car. Flat on top following the curve of the front (side view) merging to the front quarter panels (where the 1303 has the fat trim piece) and being open (view from the back)

Chris

[thelazerviking]

the bug is like a giant airfoil, especially with it's flat bottom. put a front spoiler on it and lower the car then instead of high pressure under the car it should be a lower pressure. i think the reason the rear end feels so light at high speeds is because of how rounded out the back end it, there's probably a very great area of low pressure there, pulling the rear end up. if the front is lower than the rear that should help keep the rear end down too because it creates low pressure in the rear of the car, that's basically what a spoiler does though. check out how airplane winds work with airfoils.

[bean_8044]

this reminds me of something i was working on in Japan.
http://www.asahi-net.or.jp/~ge8w-ngk.../mente272.html
Its in japanese, but you can see the schematics which is all you really need. No, that wasnt my car, but i was trying to make it work on mine

[PJL54Oval]

HotRod Magazine just did an article on this subject. Some simple things to do are the front air dam, Lower the front of the car sightly more than the rear (accelerates the air under the car), Add side skirts to prevent air from entering the bottom from the sides and Spoil the air off the back of the car. Spoiling the air actually accomplishes two things. It decreases lift especialy with the shape of the beetle and also reduces drag by eliminating the low pressure at the back of the car.

Now on a completely different line of thought, has anyone here ever seen the Chaparral 2J? It was nick named the "sucker car" and had two fans mounted on the back of the car to literally suck the air from under the car. If you are running an air cooled engine you could draw some of the air from under the car (like some of you do) and this actually helps! Here's a link that shows the two snowmobile engine driven fans on the 2J car. http://www.petroleummuseum.org/Chaparral/Tour4Indy.html

I doubt that this will help us much but it was really cool to see.

Jim Hall was a pioneer in Ground effects and dominated road racing. He won indy his first year (Johnny Rutherford driving) by channeling the air under the car to create down force.