Spindes, Welded Or Machined?

[steven erwin]

Thanks For The Replies, I Went Through Franklin's Vw Wreck For Caliper Brackers. There Wasn't A Need To Have The Hubs Machined. Everthing Fits Just Right. Thanks,
Erwin

[jmd]

Steven,
I wonder if you might be able to post your parts list, it seems you have had some good luck with getting it all together.

I would love to know what combo of parts your using.

Thanks in advance for any insight.
jmd

[steven erwin]

GOOD MORNING,
IT WAS PRETTY EASY, I WENT TO http://www.franklinsvwwerks.com/ AND ASKED HIM FOR THE PART# FOR THE CALIPARS. THEN CALLED WILWOOD FOR THE PART# FOR RED CALIPERS TO MATCH THE ONE FRANKLIN GAVE ME.THE CALIPERS ARE DYNALITE II AND JUST ADD RD TO THE END OF THE PART# INSTEAD OF B. THE COST PER CALIPER WAS ABOUT $105 DOLLAR APIECE (ABOUT $10 DOLLARS CHEAPER THAN BLACK).I ORDERED THEM THROUGH SUMMIT, THEN FRANKLIN SENT ME THE ADAPTORS AND HARDWARE FOR $250, AND I USE MY STOCK SPINDLES, NO MODS NEEDED!!! ALSO CHECK OUT VDUBS FOR PORSCHE KITS. HIS PRICES ARE IN CANADIAN DOLLARS, SO THEY ARE CHEAPER THAN THE LIST PRICE.
ANY ? FEEL FREE TO ASK,
ERWIN

[spooky]

Originally Posted by steven erwin

GOOD MORNING,
IT WAS PRETTY EASY, I WENT TO http://www.franklinsvwwerks.com/ AND ASKED HIM FOR THE PART# FOR THE CALIPARS. THEN CALLED WILWOOD FOR THE PART# FOR RED CALIPERS TO MATCH THE ONE FRANKLIN GAVE ME.THE CALIPERS ARE DYNALITE II AND JUST ADD RD TO THE END OF THE PART# INSTEAD OF B. THE COST PER CALIPER WAS ABOUT $105 DOLLAR APIECE (ABOUT $10 DOLLARS CHEAPER THAN BLACK).I ORDERED THEM THROUGH SUMMIT, THEN FRANKLIN SENT ME THE ADAPTORS AND HARDWARE FOR $250, AND I USE MY STOCK SPINDLES, NO MODS NEEDED!!! ALSO CHECK OUT VDUBS FOR PORSCHE KITS. HIS PRICES ARE IN CANADIAN DOLLARS, SO THEY ARE CHEAPER THAN THE LIST PRICE.
ANY ? FEEL FREE TO ASK,
ERWIN

alll sounds very interesting!
What car are you fitting these to?