anyone try design 90s on a 1303 - Page 2

madpballer232 · #16 December 1st 2005, 12:54

wow bad bug what does that have to do with anything. i could possibly see that apply if you were asking how much a design 90 ad a tire weighs but not a turbo twist or cupII.

dirk.Gysbrechts · #17 December 1st 2005, 14:32

@LOAF ; I have Remmele struts, spindles are stock, rear is IRS.....

but on this moment i have already new Rims.....

8 x 18 Techart

Bad bug · #18 December 1st 2005, 19:44

Madpballer232 i just wanted to know what's the weigh as i don't want too much of a heavy rim on my car.

LOAF · #19 December 1st 2005, 22:37

Techart.. NICE.. very NICE..

very jealous..

Loaf

redhot · #20 January 9th 2008, 12:26

Does these wheels fit without doing anything to the struts and rear IRS supspension? I have a 73 1303 with the 3-bolt strut. Will I have to change this, and modify the rear by grinding suspension stop and changing the forward bolt on the spring plate?

Design 90`s, 6x16 and 8x16 ET 52.

Bullyboy · #21 January 10th 2008, 00:24

Not mine, but it looks good.

redhot · #22 January 12th 2008, 10:27

Quote:

Originally Posted by redhot

Does these wheels fit without doing anything to the struts and rear IRS supspension? I have a 73 1303 with the 3-bolt strut. Will I have to change this, and modify the rear by grinding suspension stop and changing the forward bolt on the spring plate?

Design 90`s, 6x16 and 8x16 ET 52.

Anyone? I`m about to buy some and would really like to know this first

Bullyboy · #23 January 12th 2008, 11:17

Not sure on the 1303 but you could call Jon at topline and ask him, or check VDub Engineerings wheel fitment section.
And this is a pretty good wheel calculator
http://www.wheelsmaster.com/rt_specs.jsp

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)