GermanLook Forums  

Go Back   GermanLook Forums > General > Project Builds

Reply
 
Thread Tools Display Modes
  #1  
Old January 13th 2006, 21:00
nbturbo's Avatar
nbturbo nbturbo is offline
Registered User
 
Join Date: Dec 2002
Location: South Australia
Posts: 81
the colour is Double Yellow-the same as my 02 NB Beetle in the Avatar.I am doing the Oval to have some features like the NB-same colour inside as well with the grey trims and black leather seats and have found 17inch wheels that look similar.
Reply With Quote
  #2  
Old January 13th 2006, 21:18
nbturbo's Avatar
nbturbo nbturbo is offline
Registered User
 
Join Date: Dec 2002
Location: South Australia
Posts: 81
When I did the inside,I found a Velour fabric the same colour as the NB,but it looks very similar to the original Oval fabric.I have fitted 2 interior lights from an NB as well as the passenger grab handle and the sunglasses holder.When I fitted the sound system,the only place I could get the small speakers was up in the headlining-so I made some aluminium brackets that screwed to the sunroof brackets under the trim, and just have to push the speakers into the holes.
Attached Images
File Type: jpg 17rimsm.jpg (31.5 KB, 231 views)
File Type: jpg sunroof6sm.jpg (30.5 KB, 210 views)
File Type: jpg trim7sm.jpg (41.8 KB, 204 views)
File Type: jpg spekr1sm.jpg (31.2 KB, 231 views)
Reply With Quote
  #3  
Old January 22nd 2006, 21:10
nbturbo's Avatar
nbturbo nbturbo is offline
Registered User
 
Join Date: Dec 2002
Location: South Australia
Posts: 81
Got the handbrake finished-had to make some extension tubes to lengthen the original tubes in the pan-I had to reposition these when I modified the pan for the auto,and didn't know how long they would need to be-I was too short by 85mm-all works OK now.Finally finished the auto dip stick tube.I took ages to decide where to actually make it fit-decided to bring it into the engine bay.Had to make it 100mm longer to get it in and at the correct angle.Shortened a dipstick from an auto Kombi and scribed new level marks.Have made the dipstick an airtight fit in the tube to prevent any fluid being blown into the engine bay-will weld an 8mm tube high up on the outer tube and fit a filter and drain pipe to vent any fluid out behind the LH back wheel.Now it's back on the ground,I think I will lift the back one spline,then align the rear wheels.I have all the VW tools to line up the back wheels.
Attached Images
File Type: jpg aero11sm.jpg (44.7 KB, 228 views)
File Type: jpg auto42sm.jpg (44.6 KB, 225 views)
Reply With Quote
  #4  
Old January 23rd 2006, 03:12
LLVWGL LLVWGL is offline
Registered User
 
Join Date: Mar 2005
Location: Gilbert,AZ,USA
Posts: 174
the workmanship on that car is top notch!!!


It is a love it/hate it type of look, but i think you achieved your goal perfectly.
Reply With Quote
  #5  
Old January 23rd 2006, 12:55
oasis's Avatar
oasis oasis is offline
Registered User
 
Join Date: Dec 2002
Location: timonium, md usa
Posts: 1,290
Thanks for the continuing updates. I find it really fascinating. It makes me ready for my next GL project (if I live long enough).
Reply With Quote
  #6  
Old March 4th 2006, 06:55
nbturbo's Avatar
nbturbo nbturbo is offline
Registered User
 
Join Date: Dec 2002
Location: South Australia
Posts: 81
I entered 4 of my cars in a local 'Car Show' last weekend.Have been waiting to get my 2 yellow VW's together for a long time.Put my Ford ute in as well-they had a 'Family catagory'.
Attached Images
File Type: jpg show1sm.jpg (42.2 KB, 189 views)
File Type: jpg show2sm.jpg (42.3 KB, 197 views)
File Type: jpg show3sm.jpg (50.0 KB, 180 views)
Reply With Quote
  #7  
Old March 5th 2006, 00:45
Accordion Accordion is offline
Registered User
 
Join Date: Jan 2006
Posts: 9
Are those widened fiberglass fenders? If so, where did you get them?
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:05.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
© www.GermanLook.net 2002-2017. All Rights Reserved