|
|
|
|
#1
April 4th 2006, 03:23
|
||||
|
||||
|
Yes I used an bigger sort of milling machine to drill these holes. Till 20mm drils it's okay, if larger i get the milling machine that has no belt, but only cogwheels (up to 70mm drill).
Wiebrand
__________________
B-Extreme B-Tuning..... Racebug is comming to get ya!!! 
|
|
#2
April 16th 2006, 15:40
|
||||
|
||||
|
Last friday completed the handbrake-bracket eand the pedals. After that shot the last parts in the EP.
All the parts of the chassis are now in the Epoxy Primer!!!!! Today didn't do much, cleaned an little bit. Wiebrand
__________________
B-Extreme B-Tuning..... Racebug is comming to get ya!!!
|
|
#3
April 16th 2006, 17:41
|
|||
|
|||
|
Your project is coming along nicely :agree:
|
|
#6
April 23rd 2006, 18:51
|
||||
|
||||
|
Sorry Bennoit.
There's not verry much news, but there's some; Past week didn't do much on the bug. We had to finish the racecar for past wednesday, because we went racing on circuit Zandvoort. What an experience was that!! SUPER COOL!!!! Cruizing with 175km/h on the straight, full in the brakes and with squeesing tyres through the corners LOVING IT !! Today started with bonding the chassistunnel. Quite an difficult job that bonding. Looks easier than it is. No pics today Wiebrand
__________________
B-Extreme B-Tuning..... Racebug is comming to get ya!!!
|
|
#7
April 30th 2006, 13:31
|
||||
|
||||
|
Today bondo-ed (i don't know an other word for it) the tunnel of the chassis. Stays and quite difficult job, but it
s nicely done. Also masked everything so I can spray filler (higbuild primer) soon. Wiebrand
__________________
B-Extreme B-Tuning..... Racebug is comming to get ya!!!
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Hybrid Mode
