![]() |
|
|
|
#1
|
|||
|
|||
|
i would certainly be intred depends on how much they were of course
__________________
74 german look project
|
|
#2
|
|||
|
|||
|
well the more people interested the more i can persuede him
he just sent me a 2 metres of carbon fibre fabric for a product (non car related) i'm doing, so it goes to show how much of a gent he is but yeah if theres enough interest i could get a load done by him at the same time heres hoping |
|
#3
|
||||
|
||||
|
I would be interested in a set of CF door panels, depending on the price.
Would they just be the sheets with NOTHING cut out (door handles/opener bits/window winders)? Would be better as it allows people the flexibility to do what they want with them... I have electric windows so dont really need the window winder holes... Cheers, Sam C
__________________
1973 1303 (super beetle) in Jaguar British racing green, Raby 2270, B spec gearbox, Lots of carbon fibre, Wolfrace Octane Black 17x7.5, Goodyear Eagle F1's, Kerscher suspension front and rear, kamei airdam in carbon, corbeau seats, momo millunium steering wheel. CDT eurosport 6.5 front speakers, IDMAX 12D2 sub, rockford old school amps. |
|
#4
|
|||
|
|||
|
yeah that sounds about right
but at the moment its just an idea depends what interest is generated |
|
#5
|
||||
|
||||
|
Good stuff, keep us posted.
It wouldnt be a big deal to cut the holes for handles etc yourself as carbon fibre is very easy to work using a dremmel or some other brand of high speed rotary tool.... Just remember the dust mask and goggles (the dust is very bad for your lungs, and apparently is horrible if it gets in your eyes). Sam C
__________________
1973 1303 (super beetle) in Jaguar British racing green, Raby 2270, B spec gearbox, Lots of carbon fibre, Wolfrace Octane Black 17x7.5, Goodyear Eagle F1's, Kerscher suspension front and rear, kamei airdam in carbon, corbeau seats, momo millunium steering wheel. CDT eurosport 6.5 front speakers, IDMAX 12D2 sub, rockford old school amps. |
|
#6
|
||||
|
||||
|
arrrrrr another slag off of lap , sam why dont you tell him about your parts from me did you have to sand them down and bring them back up to a shine like you did on the other parts ???????, lee L.A.P
|
|
#7
|
|||
|
|||
|
i saw some of your parts on a car at a show and am now saving to buy a few things off you, i was very impressed with it
__________________
74 german look project
|
|
#8
|
||||
|
||||
|
Quote:
These were not from LA Performance.. The airdam on the car was from LA Performance and is still perfect... Would more than happily buy more carbon from LAPerformance. ![]() The parts with problems were from Carbon Joe, and were fine until I left them out in the UK weather (rain then sun cooked salty marks into them!)... They are now sealed properly, so shouldnt suffer from this issue again... Dont believe they were waxed or lacquered!!! (so unprotected) Sorry I didnt clarify this in the initial post, which wasnt posted as a slag off, more as a how to for others who may experience this issue. **EDIT - I think I have (yet again) managed to get the wrong end of the stick.... BugFOOL was doing the slagging. Cheers, SAm C
__________________
1973 1303 (super beetle) in Jaguar British racing green, Raby 2270, B spec gearbox, Lots of carbon fibre, Wolfrace Octane Black 17x7.5, Goodyear Eagle F1's, Kerscher suspension front and rear, kamei airdam in carbon, corbeau seats, momo millunium steering wheel. CDT eurosport 6.5 front speakers, IDMAX 12D2 sub, rockford old school amps. |
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|