|
|
|
|
#1
May 8th 2006, 09:56
|
|||
|
|||
|
Ah ok. So the pans itself are still in Epoxy primer? I think I get it now.
I am currently busy scraping off the rubbish that is painted underneath my floorpan as we speak. Once that is done, hopefully my boss will give me a price on how much it will be to sandblast my chassis. Then it should be painted in Epoxy primer too(but I want to finish the welding work first, obviously)... 
|
|
#2
May 9th 2006, 13:26
|
||||
|
||||
|
Race look very nice project you have going Keep it up you are going to have one very stiff fun to drive super when your done.
__________________
Vincent W. Strader 64 Type I and 73 1303 going GL top to bottom now if i could just decide wich one. 04 Mitsubishi Lancer plans power 13b Turbo Rotary 300 hp Wheels 18" turbo twists inside Sparco blue racing seats Sparco pedels, wheel, and shifter nob Sparco Rep Andrew @ www.pilotracegear.com Good deals on Sparco stuff 
|
|
#3
May 10th 2006, 18:56
|
||||
|
||||
|
Thanks guys.
@zeroaxe.. jep pans are still in Epoxy Primer Today sanded the tunnel of the chassis with P320. Sadly sanded through the filler on the bare metal, so there has to be sprayed another layer on. Masked the pan and sprayed another layer of filler on. Then let it dry in the sunlight. Tomorrow the welding begins again  Wiebrand
__________________
B-Extreme B-Tuning..... Racebug is comming to get ya!!!
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Hybrid Mode
