A couple questions about a 993 Brake conversion

[SoCalGL]

okay so I have the shimming down pat...

but what about e-brake lol ....

anybody??

[notch62]

Hi I did the 993 conversion to my 62 notchback. I was the first to have Lanner do the 993 front conversion. For the front I used a 944T hubs (1988??), 993 disc and 993 calipers. The conversion is the pretty much the same for the front either type 1 or type 3 the difference is the work on the spindles (which is done by Lanner). I would do one thing different and have Lanner make the front hubs instead of buy 944T hubs. For the rear I bought 944 n/a (from a 1983 ??) what you need to get is the plate (holds the bearings in place and all of the e-brake pieces + the hub. I got 993 rear disc and 993 calipers. I did not need the 5mm spacer that some people have talked about. Anyways I looked for ever about this conversion and could not anything the advice I was given is buy the parts and It will all make sence. Lanner is great to work with and his prices are on his site. I have a few pics with my brakes under my profile.