how mad will this be in my bug (check the video)?

adaptorman · #1 June 16th 2006, 13:50

Quote:

Originally Posted by cpgn0805

Mad Mad Mad.... up 100 mph = no funny , all car need work like a clock for safety drive

Good Luck

Friend from Perú

CARLOS PALOMINO

Pic from my car

cheers my matey has a 1303s and dose 100mph (engine screems but feels ok and its not lowerd ?cheers

**volkdent** · #2 June 16th 2006, 18:16

That should take care of it!!! I'm really impressed that you're able to run your shifter cables through the shifter tunnel. I have to run mine outside due to the position. Your coolant lines run under the motor and up the back?

Jason

adaptorman · #3 June 16th 2006, 20:24

Quote:

Originally Posted by volkdent

That should take care of it!!! I'm really impressed that you're able to run your shifter cables through the shifter tunnel. I have to run mine outside due to the position. Your coolant lines run under the motor and up the back?

Jason

im hopeing so but a bit woried about if i shud weld some strength to heater channels?year cables bend nicely and work had to extend then about 3foot in the tunnel?,the heater tubes i wasnt sure were to run them ,and didnt want them up and down ,so thought use the centre chassi tunnel and weld too lenghs of wide box shud help strengh as well?any little ideas are welcome had to rearrange the rear wheel archers 2day they now 20inch wide ether side

IMG]http://i6.tinypic.com/14mct8m.jpg[/IMG]

adaptorman · #4 June 18th 2006, 11:31

yearh be nice i can understand what u mean an say, i like things to be right plus it be classed as a kit car (q plate then tests and inspections by vosa/dvla )so work as stopped (its time to dismantal the idea nice while it lasted thanks all for your coments

LLVWGL · #5 June 18th 2006, 16:43

Quote:

Originally Posted by adaptorman

so work as stopped (its time to dismantal the idea nice while it lasted thanks all for your coments

What? you are going to dismantle it?

adaptorman · #6 June 18th 2006, 17:34

Quote:

Originally Posted by LLVWGL

What? you are going to dismantle it?

yep found a chap whos wanting engine (im a bit pissed off but theres always something else i reckon )

nice while it ladted (got voza poeple coming 2moz just to see what they say?lucky only stands me at 80quid (thank god i ant got 1000s sat in it,ill let you know the outcome

adaptorman · #7 June 30th 2006, 20:52

Quote:

Originally Posted by adaptorman

yep found a chap whos wanting engine (im a bit pissed off but theres always something else i reckon )

nice while it ladted (got voza poeple coming 2moz just to see what they say?lucky only stands me at 80quid (thank god i ant got 1000s sat in it,ill let you know the outcome

we have good news didnt need a sva (few)as i got enoegh pionts to get it on the road ,so i was very happy so started with a few engine mods and weldind etc
a few pics here (its now a monster 340bhp remaped ecu,bigger turbo, and thought id put a dumpvalve on it too

remaped ecu(inside)

nice new big turbo

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)