Project "Racelook"

Racelook · #1 June 27th 2006, 10:32

Yesterday, after an half day of relaxing I was sober again (is that the right word?) and I could start again with working on the car. Sanded several things, masked some things and then again it was time for spraying again. For some reason I mixed the paint too thin so I get 'lopers' all the time. Bad **** because then I have to sand again.

Today I started sanding again, degreasing, etc. and finally some painting in red and clear.

Wiebrand

Racelook · #2 June 28th 2006, 07:46

So, last night and this morning started with sorting out the bits and bolts that I had zinkc-ed.

Here some pics (sorry for the size :roll: )

Wiebrand

Racelook · #3 June 29th 2006, 06:25

Last night sprayed the last parts (ten) red. Now only 25 - 30 parts have to be sprayed in black. And after that finally everything can be assembled.

Wiebrand

zeroaxe · #4 June 29th 2006, 07:33

Wiebrand,

OMG! This is insane. Man, it looks good. Keep the pace going and bring in the pics, thick and fast!:agree:

Racelook · #5 June 30th 2006, 05:46

Hahaha.. thanks mate!!

Yesterdayevening sprayed till 0.30a.m. a part or 10-15 in black. Tomorrow antoher ten parts and all the painting of the chassis is done.

Wiebrand

zeroaxe · #6 June 30th 2006, 05:58

So you painted some more parts then? Geesh, I would've expected some pics at least!!!!

So once you have finished bolting your chassis back together, mine would be ready for you to work on

Racelook · #7 July 2nd 2006, 15:57

Quote:

Originally Posted by zeroaxe

So once you have finished bolting your chassis back together, mine would be ready for you to work on

No problem, bring him on

Hahaha and pics there will be;
So here some pics of the red stuffl
http://www.keversite.nl/fotoalbum/fotos/34467.jpg

Today sanded some things, hang them, degreased, prepared the gun, maked the paint and spraying => BLACK

turboL · #8 July 4th 2006, 23:56

Hey Mate from JS down under!,Parts look amazing the cars going to look greate so much detail.Ive got my fuel lines in ,I used 12mm aluminium from Earls ,thanks for the inspiration and advice.JS

Racelook · #9 July 6th 2006, 06:46

Hey nice man.

P.s. you check if you can get the shiftingpipe in it afterworths?
Mine luckily did yesterday

Wiebrand

p.s. soon more pics of the build-up.

56oval · #10 July 6th 2006, 08:03

I don,t think that gearbox is going to move with that mount/brace nice work.are you going to wrap everything in bubble wrap as you put things together .:agree: :agree: :agree:

Racelook · #11 July 7th 2006, 09:50

Quote:

Originally Posted by 56oval

bubble wrap

Yes I had two boxes full with that stuff. All the painted stuff is waiting in that wrap to the point it's going to be build-up.

Wiebrand

Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)