911 dash for a 1302...will this work?

[EvilOval]

Its not that hard to do....once you have an idea of what you want it to look like. I've never used fiberglass in my life. But after purchasing a very ill fitting 911 shroud I ended up learning as I've gone. And while I've had a few setbacks here and there.....its been a fun experience. Anyways, here is a pic of the dash as it was 2 weeks ago (I'm working on the cover panel that will fit below the steering column).

http://www.thesamba.com/vw/forum/alb...?pic_id=289070

Once the general shape is complete I'll go back over it and make some adjustments here and there before I create a mold of it. Once I've made the mold I'll make 3 of them. The 1st one will be used to figure out reinforcement points as well as the glove box. The second one will be a finished unit with CF accents at certain points and what isn't CF will be painted to match the body. The final one will be completely CF. I might be making a 1303 version since a friend of mine was asking if I could use his dash as the pattern and then modify it to house the 911's cluster. So, that might be another form that I have laying around till I get my own 1303.

[EvilOval]

Well I was just about done. I have made a revision to the dash since I was mocking up the gauges and realized that I would have to cut a section of the dash to fit the tach and speedo. So (thanks to a mold that I took of the gauge cluster section) I have raised and pulled out the area that the gauges would fit to avoid cutting the dash and will lower the steering column a 1/2" to make everything fit. So, I'm redo'ing a few parts because of the change. Will have a few pics up....so if you have any ideas or suggestions please feel free to let me know.