|
|
#8
September 16th 2006, 20:56
|
||||
|
||||
|
During mock-up the struts bottomed out with a full 7mm between the channels and strut-rods. I put a ~7 degree downward angle at the root of the strut-rods, and a 12 degree upward bend about 10" away from the rod-end to keep them from bottoming.
__________________
Yetibone '71 1302S 1.8 '73 1303S 2.3 '83 928S 4.7 Last edited by yetibone; September 16th 2006 at 21:41. 
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|
Threaded Mode