Seats

[zen]

i didn't build mine, but some custom ones were made to mount fiero gt seats in my chop top. they happen to fit the momo seats i will be using perfectly. they are fiero sliders mounted on custom brackets. they are just 2" stock bent like this (side view)...
_____________
_| |_

[this is not displaying right, but just timagine the backwards "L" and the forwards "L" at either end of the long horizontal bar and you will have it.]

bolted to the pan (not the safest thing though) on the small tabs on the bottom and the sliders are bolted on the long horizontal piece front and rear. the seats bolt on top of the sliders.

i plan on running some stock across the bottom of the pan perpendicular to the brackets to strengthen the mount. don't want to see those bolts pull through the pan in an accident.