Installing windows

[Kafer_Mike]

A couple tips:
-Spray the window seal with a light coat of ArmorAll (I prefer over soapy water.).
-Overlap your string at the top and center of the window by at least 4''-6".
-Grip the string 8"-10" away from the seal.
-Pull the one end of the string towards the front of the car until you clear the upper corner and 1/2 way down the b-pillar, then pull the other end of the string untill you clear the radius at the rear of the window. Finish by pulling the first end around the front bottom corner and to the rear.
-If the string gets hard to pull or gets stuck, use a large clockwise circular motion as you pull.

[ricola]

I believe most soaps contain salts which can harm rubber, better to use a water-based lubricant (don't laugh but KY Jelly is popular!)
Rich