Strut crowns with adjustment plates

[SprintStar]

Originally posted by yetibone

I also used a small die-grinder to move the eccentric locator's inner edge 2mm. towards the strut tube (all they are for is alignment adjustment. They don't actually KEEP it aligned. The bolts do that)
It worked great om Hummbug! We posted pics in our profile of the struts installed.

Yetibone

Hmm... Good idea of yours!!! But I thought the cam is supposed to help hold the alignment as well?

If you are sure the hole trick will do and keep the alignment for a long time, I'll go ahead with it and halt the aluminum arms project. They are expensive!!!! About $100 a pair!