Taadaa!!!!

[Trogdor]

Originally Posted by NO_H2O

Fronts look like 7's or 7.5's. I know that Mikey had to flare his rear fenders to get 9's under his Ghia with standard arms.

Sorry for ****ty pic.

[johnnyvee]

is there any performance reason to put 9's in the front

[DORIGTT]

Evacuates the wallet faster than the 7" wide versions

[1303R]

thats blantantly not a 9........

[DORIGTT]

It appears to start at the 1" mark and go to 9 1/2" or so.

The sticker does say 'BIG-UN' though.

[1303R]

a 9 inch rim will have an overall size of about 10inch. 9 inch is inside lip where tyre sits. could squeeze a 245 on a 7 1/2 or 8 but you could also swap stickers over...............

[vujade]

Originally Posted by DORIGTT

It appears to start at the 1" mark and go to 9 1/2" or so.

Not only that, but he's measuring the Tire. Not the rim. And even when
you measure the rim, its the inside measurement, not the outsite measurement.

A 7" rim is almost 8" wide.
A 9" rim is almost 10" wide

I still dont think thats a 9 my friend.

Lets see the stampings on the back where it says 17 x 9 et55

[wrenchnride247]

Well, I just measured my front wheel that's 7x16 ET55 with 205/50/16, and it is 9 inches wide. (without starting at the 1 inch mark )