Machining drums to be used as hubs?

[dub_crazee]

Originally Posted by Steve C

Hi

You could use stock 4 stud drums instead of discs and do the same thing, the disc will give a slight track increase of the drum. If you then studded the brake drum to 5x130 that would work.

On my old 1302 I used 5x130 bug discs with the braking surface removed, then bolted the Porsche rotor on the back with a spacer to get the offset correct in the same manner that Porsche rotors fit up.

Steve

Steve your set up looks nice

can i ask - are the studs fitted to the hub, or to the disc, then go through the hub?

And what studs did you use?

Thanks

Dean