Question - Rear coilovers - on a type 3...

[split_trix]

I've only just found out that the forum up again ....

anyway, back to the question... I played around with a few coilover setups on my bug with 944 springplates and covers, no torsion bars just held in place by urethene bushes.. i was told by an MOT station that you would get toe in and out when the bushes warm up and that would create the rear wondering across the road...

this may not be your question as you say you've got uniballs, i would say its likely to be the rear wheels not pointing in the right direction...

out of interest what uniballs are you using ?

chris

[Angelo Amato]

Hi Chris,

great to be back on here isn't it ! on here we can post without being critisised for trying out new stuff !

my setup is this :-





I approached Red9Design to develop a setup for the type 3, there is definitley no flex on the uniballs - they have a nice thick welded boss behind the cover and then also sit in new donut rubbers.

I HAVE JUST RECEIVED MY SOILD MOUNT KIT FOR THE REAR SUBFRAME (not poly but NYLATRON!, VERY NICE QUALITY BUT NOT CHEAP (BUT WHAT IS!) WILL TRY AND GET THEM INSTALLED AND REPORT RESULTS!