Down and out in 2008

chug_A_bug · #1 June 28th 2008, 03:32

NIce Job Sandeep
Keep the Pics coming

Chris.

gonebuggy · #2 June 28th 2008, 08:15

You're committed now bro!

Looks good, and I like the plans you have in store for it! Keep up the good work.

Alex

Rob · #3 June 28th 2008, 08:23

Wow man, when you dive in, you DIVE in !
Good work!

Rob.

DORIGTT · #4 June 28th 2008, 11:56

How much 'massaging' did you have to do in the crotch area to fit the 915 in there?

Also Sandeep, do you have pics of your A/W setup?

Sandeep · #5 June 28th 2008, 14:39

I'll take some pics of the 'crotch area'

but I notched it enough not to harm the torsion bar area. The 915 bellhousing surface sits about 6mm further to the rear than the stock gearbox, no adapter parts for the 915 required as I built all the peices myself.

Sandeep

Rob · #6 June 29th 2008, 10:58

Sandeep, what kind of welder do you use ?

Rob.

Sandeep · #7 December 31st 2009, 14:29

Having 2 week off really helped

I welded up the pans and sandblasted them, and then acid etched with phosphoric acid.

Some POR15 ..

And then some "tie coat" primer

And then two coats of Tremclad yellow to closely match the body

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)